|
Sr. No.
|
Authors
|
Title of Paper, Journal Name, Volume No/Issue No, Page Nos.
|
Date of Publication
|
DOI
|
|
Prof. Rakesh Sehgal
|
- 1.
|
Sanjay Kumar, Rakesh Sehgal, M.F.Wani, Mukund Dutt Sharma
|
Stabilization and Tribological Properties of Magnetorheological (MR) Fluids: A Review
Journal of Magnetism and Magnetic Materials, Elseiver, Available online 16 July 2021, 168295
|
2021
|
https://doi.org/10.1016/j.jmmm.2021.168295
|
- 2.
|
Sanjiv Kumar, Rakesh Sehgal, and Sanpreet Singh
|
Vibration signature analysis of whirling shaft of varying diameters operated at varying speeds, IOP Conf. Series: Journal of Physics: Conf. Series 1240 (2019) 012155, pp. 1-6
|
August, 2019
|
DOI: 10.1088/1742-6596/1240/1/012155
|
- 3.
|
Sanjiv Katoch,
Rakesh Sehgal,Vishal Singh, Munish Kumar Gupta, Mozammel Mia and Catalin Iulian Pruncu
|
Improvement of tribological behavior of H-13 steel by optimizing the cryogenic-treatment process using evolutionary algorithms, Tribology International, 140 (2019) 105895, pp. 1-13
|
August, 2019
|
|
- 4.
|
Sanjiv Katoch,
Vishal Singh and Rakesh Sehgal
|
Mechanical Properties and Microstructure
Evaluation of Differently Cryogenically
Treated AISI-H11 Steel, International Journal of Steel Structures, Springer,
ISSN 1598-2351
|
Feb., 2019
|
DOI 10.1007/s13296-019-00216-4
|
- 5.
|
Sanjiv Katoch,
Rakesh Sehgal and Vishal Singh
|
Wear behavior of differently cryogenically treated AISI H13 steel against cold work steel, Proc. IMechE Part E, Journal of Process Mechanical Engineering 0(0) 1-14
|
June 2018
|
DOI: 10.1177/0954408918781621
|
|
Prof. M.F.Wani
|
- 6.
|
B Parvez, MF Wani
|
Tribological behaviour of nano-zirconia reinforced iron-based self-lubricating composites for bearing applications, Tribology International, 159
|
2021
|
https://doi.org/10.1016/j.triboint.2021.106969
|
- 7.
|
J Singh, MF Wani
|
Perpetual effect of laser surface texturing on tribological properties of Ti3SiC2/GNP composite-a fretting wear study, International Journal of Applied Ceramic Technology
|
2021
|
10.1111/ijac.13810
|
- 8.
|
A Kumar, GD Thakre, MF Wani
|
Influence of load and speed on tribological performance of Cu nanofluids in EHL line contacts, Materials Today: Proceedings, 41, 969-975.
|
2021
|
https://doi.org/10.1016/j.matpr.2020.10.931
|
- 9.
|
S Saleem , MF Wani
|
Effect of load on the behaviour of tribofilms formed at the interface of austenitic steel and ductile iron – a raman spectroscopic study, Advances in Materials and Processing Technologies,
|
2020
|
https://doi.org/10.1080/2374068X.2020.1860591
|
- 10.
|
S Danish S, MF Wani.
|
Insights into the tribological behavior of IF-WS2 nanoparticle reinforced mild extreme pressure lubrication for coated chromium/bulk grey cast iron interface, I.Mech E Journal of Tribology,235(7), 1478
|
2020
|
|
- 11.
|
J Singh, MF Wani.
|
Fretting wear of spark plasma sintered Ti3SiC2/GNP ceramic composite against Si3N4, Ceramics International, 47(4), 5648-5655
|
2020
|
https://doi.org/10.1016/j.ceramint.2020.10.150
|
- 12.
|
A Raina, M Irfan Ul Haq , MJ Mir, O Gulzar, MF Wani.
|
Snergism of TiO2 and graphene as nano-additives in bio-based cutting fluid- an experimental investigation.
Tribology Transaction, 64(2), 350-366
|
2020
|
https://doi.org/10.1080/10402004.2020.1842953
|
- 13.
|
S Banday, MF Wani.
|
Nanomechanical and nanotribological properties of self-lubricating Ti/MoS2 nanocoating at nanoscale level, International Journal of Surface Science and Engineering ,14(2), 89-104.
|
2020
|
https://doi.org/10.1504/IJSURFSE.2020.108201
|
- 14.
|
A Charfi A, AI Dhaou, M Kharrat, Wani MF, M Dammak.
|
Tribological properties of composites based on nano-sized silicon nitride ceramics.
Journal of Materials Education, 42 (1-2), 29-40
|
2020
|
https://doi.org/10.1007/978-3-030-52071-7_38
|
- 15.
|
Qadri SIA, Harmain GA, Wani MF.
|
The effect of cutting speed and work piece hardness on turning performance of Ni based super alloy-718 using ceramic cutting inserts.
Engineering Research Express 2020, 2(2), 01-21.
|
2020
|
https://doi.org/10.1088/2631-8695/ab40f0
|
- 16.
|
S Danish S, MF Wani.
|
Tribological behaviour of chrome-deposited SAE9254 grade steel top compression piston ring under lubrication starvation and mild extreme pressure lubrication, International Journal of Engine Research, 22(4), 1285-1300
|
2020
|
https://doi.org/10.1177/1468087419890995
|
- 17.
|
Qadri SIA, Harmain GA, Wani MF.
|
Influence of tool tip temperature on crater wear of ceramic inserts during turning process of Inconel -718 at varying hardness,Tribology in Industry, 42(2), 310-326.
|
2020
|
10.24874/ti.776.10.19.05
|
- 18.
|
Danish S, Wani M F.
|
Tribological behavior of chrome-deposited SAE9254 grade steel top compression piston ring under lubrication starvation and mild extreme pressure lubrication, International Journal of Engine Research,
22(4), 1285-1300
|
2020
|
https://doi.org/10.1177/1468087419890995
|
- 19.
|
AS Kalyanwat, S Sarkar, M Biswas, R Haldar, S Bandyopadhya, MF Wani .
|
SPS MoSi2-reinforced Y-Alpha-SiAlON ceramics: mechanical and high temperature tribological properties, J of Australian ceramic society, 01-09
|
2019
|
|
- 20.
|
Danish S, Harmain GA, Wani MF.
|
Evaluating scuffing failure in dry sliding conditions of monolayer chromium piston ring/bulk grey cast iron liner interface, Tribology Online, 15(1), 9-17.
|
2019
|
https://doi.org/10.2474/trol.15.9
|
- 21.
|
Mushtaq S, Wani MF, Nadeem M, Najar K, Mursaleen M.
|
A study on friction and wear characteristics of Fe–Cu–Sn alloy with MoS2 as solid under dry conditions,
Academy Proceedings of Engineering Science, 12, 1-7.
|
2019
|
. https://doi.org/10.1007/s12046-019-1208-8
|
- 22.
|
Khan MJ, Gandotra H, Saleem SS, Wani M F.
|
Correlating the effect of material hardness, counterface hardness and load on the friction and wear of virgin and glass filled polytetrafluoroethylene (PTFE) using Taguchi approach and statistical analysis,
Jurnal of Physics: Conference Series 2019, 1240, 1-9.
|
2019
|
https://doi.org/10.1088/1742-6596/1240/1/012106
|
- 23.
|
Qadri SIA, Harmain G A, Wani M F.
|
A study on effect of tool tip temperature on wear of ceramic cutting tools. Journal of Physics: Conference Series 2019, 1240, 1-8.
|
2019
|
https://doi.org/10.1088/1742-6596/1240/1/012119
|
- 24.
|
Qadri SIA, Harmain GA, Wani M F.
|
Assessment of machinability of super alloy inconel 718 using aluminium oxide and mixed oxide ceramic cutting tool, IOP Conference Series: Materials Science and Engineering 2019 ;561, 1-6.
|
2019
|
https://doi.org/10.1088/1757-899X/561/1/012057
|
- 25.
|
Qurat-ul-Ain, Wani M F, Sehgal R.
|
Analyzing structural and tribological characteristics of different materials at micro- and nano-level using molecular dynamics simulations: An overview.
IOP Conference Series: Materials Science and Engineering 2019, 561, 1-8.
|
2019
|
https://doi.org/10.1088/1757-899X/561/1/012052
|
- 26.
|
Ashraf U, Saleem SS, Wani MF, Khan MJ.
|
Effect of load on the tribo-performance of 23-8N valve steel against GGG-60 seat material.;
Materials Today: Proceedings 2019, 19(2):349-353.
|
2019
|
https://doi.org/10.1016/j.matpr.2019.07.611
|
- 27.
|
Manzoor S, Wani M F, Saleem SS.
|
Effect of load on the friction and wear behaviour of silicon nitride and silicon nitride- titanium carbide ceramic composite. Materials Today: Proceedings 2019, 19(2), 474-477.
|
2019
|
https://doi.org/10.1016/j.matpr.2019.07.638
|
- 28.
|
S Banday, MF Wani.
|
Nano scratch resistance and nanotribological performance of Ti/MoS2 coating on Al-Si alloy deposited by pulse laser deposition technique.
Trans. ASME, J. of Tribology, 141(2), 1-24.
|
2019
|
https://doi.org/10.1115/1.4041366
|
- 29.
|
S Banday, MF Wani.
|
Nanomechanical and nanotribological characterization of multilayer self lubricating /MoS2/Si/MoS2 nanocoating on Al-Si substrate. Surface and Interface Analysis 2019, 1-12.
|
2019
|
https://doi.org/10.1002/sia.6631
|
- 30.
|
D Kumar D, B Lal, MF Wani, JT Philip, B Kuriachen.
|
Dry sliding wear behaviour of Ti-6Al-4V pin against SS316L disc in vacuum condition at high temperature.
Tribology-Materials, Surfaces and Interfaces, 13(3), 182-189.
|
2019
|
https://doi.org/10.1080/17515831.2019.1637148
|
- 31.
|
H Singh, M Singh, J Singh, BS Bansod , T Singh, A Thakur , MF Wani, J Sharma.
|
Composition dependence study of thermally evaporated nanocrystalline ZnTe thin films.
Journal of Materials Science: Materials in Electronics
30, 3504–3510.
|
2019
|
https://doi.org/10.1007/s10854-018-00627-9
|
- 32.
|
G Khajuria, MF Wani, S Mushtaq, R Sehgal
|
Optimization of the effect of indentation load and dwell time on micro hardness values using fuzzy logic predictive model. Jurnal of Physics: Conference Series
1240, 1-10.
|
2019
|
https://doi.org/10.1088/1742-6596/1240/1/012085
|
- 33.
|
Khan MJ, Wani MF, Gupta R.
|
Friction and wear characterization of graphite/polytetrafluoroethylene composites against stainless steel: A comparative investigation under different environments. Jurnal of Physics: Conference Series, 1240, 1-8.
|
2019
|
https://doi.org/10.1088/1742-6596/1240/1/012107
|
- 34.
|
B Parveez, MF Wani, S Banday, MJ Mir, MF Ali, S Mushtaq.
|
Tribological characterization of iron based ceramic reinforced self- lubricating material.
Journal of Physics: Conference Series 2019, 1240, 1-9
|
2019
|
https://doi.org/10.1088/1742-6596/1240/1/0121
|
- 35.
|
MJ Mir, MF Wani , S Banday, B Parveez..
|
Influence of cutting fluid conditions on tool wear and surface roughness in hard turning AISI-D2 steel using mixed ceramic tools. Journal of Physics: Conference Series, 1240, 1-9.
|
2019
|
https://doi.org/10.1088/1742-6596/1240/1/012109
|
- 36.
|
V Kumar, MF Wani, JK Mannekote, SV Kailas .
|
Tribological properties of some fatty acids.
Journal of Physics: Conference Series, 1240, 1-9.
|
2019
|
https://doi.org/10.1088/1742-6596/1240/1/012133
|
- 37.
|
S Kumar, MF Wani, R Sehgal, S Mushtaq.
|
Friction and wear properties of Si3N4/TiC ceramic composite under nano lubrication. Journal of Physics: Conference Series, 1240, 1-9.
|
2019
|
https://doi.org/10.1088/1742-6596/1240/1/012134
|
- 38.
|
MF Ali, MF Wani, S Banday, B Parveez, MJ Mir.
|
Tribological characterization of Cu-Ni metal matrix composites using MoS2 nano- lubricant.
Journal of Physics: Conference Series, 1240, 1-10.
|
2019
|
https://doi.org/10.1088/1742-6596/1240/1/012135
|
- 39.
|
J Singh, MF Wani, S Banday, C Shekhar, G Singh.
|
Nano scratch and nanoindentation: an approach to understanding the tribological behaviour of MAX phase material Ti2AlC. IOP Conference Series: Materials Science and Engineering, 561, 1-6.
|
2019
|
https://doi.org/10.1088/1757-899X/561/1/012111
|
- 40.
|
P Kumar P, MF Wani.
|
Effect of temperature on the friction and wear properties of graphene nano-platelets as lubricant additive on Al-25Si alloy. Materials Research Express
6(4), 1-33.
|
2019
|
https://doi.org/10.1088/2053-1591/aafb46
|
- 41.
|
S Banday S, MF Wani, MJ Mir, B Parveez
|
Adhesion property of self-lubricating Si/MoS2 nanocoating at nano-scale level.
IOP Conference Series: Materials Science and Engineering, 561, 1-7.
|
2019
|
https://doi.org/10.1088/1757-899X/561/1/012082
|
- 42.
|
Hussain O, Ahmad B, Saleem SS, Wani MF, Khan MJ.
|
Effect of counter-face material on the tribological characteristics of UHMW polyethylene under synovial fluid lubrication. Materials Today: Proceedings 2019
19(2) :260-263.
|
2019
|
https://doi.org/10.1016/j.matpr.2019.07.205
|
- 43.
|
Qadri SIA, Harmain GA, Wani MF.
|
An experimental study on investigation of machining of nickel based super alloy 718.
Materials Today: Proceedings 2019, 19(2), 541-545.
|
2019
|
https://doi.org/10.1016/j.matpr.2019.07.730
|
- 44.
|
Qadri SIA, Harmain G A, Wani MF.
|
The effect of cutting speed and work piece hardness on turning performance of nickel based super alloy-718 using ceramic cutting inserts. Engineering Research Express 2019, 2, 1-29.
|
2019
|
https://doi.org/10.1088/2631-8695/ab40f0
|
- 45.
|
Himanshu, Sarkar S, Halder R , Biswas M, Bandyopadhyay S, Wani MF.
|
SPS processed TiB2 reinforced y-α-sialon composites: high temperature tribomechanical properties.
Polish Society of Composite Materials, 3, 95-99.
|
2019
|
|
- 46.
|
MJ Khan MJ, MF Wani, R Gupta.
|
Tribological performance evaluation of PTFE composites under dry sliding and aqueous environments using taguchi approach and grey relational analysis: effect of material, test environment and load. Polymer Composites, 40(7), 263-287.
|
2018
|
https://doi.org/10.1002/pc.25113
|
- 47.
|
S Mushtaq S, MF Wani.
|
High-temperature friction and wear studies of Fe-Cu-Sn alloy containing graphite as solid lubricant under dry sliding conditions. Material Research Express, 5(2), 1-23.
|
2018
|
https://doi.org/10.1088/2053-1591/aaa9a5
|
- 48.
|
S Mushtaq S, MF Wani.
|
Tribological characterization of Fe-Cu-Sn alloy with graphite as solid lubricant. Industrial lubrication and tribology ,70(2), 393-400.
|
2018
|
https://doi.org/10.1108/ilt-11-2017-0337
|
- 49.
|
J Mir J, MF Wani
|
Influence of cutting fluid and machining speed on cutting performance and wear mechanism of coated carbide tool. Jurnal of Tribologi, 18, 58-80.
|
2018
|
|
- 50.
|
MJ Khan MJ, MF Wani, R Gupta.
|
Tribological properties of bronze filled PTFE under dry sliding conditions and aqueous environments distilled water and sea water. International Journal of Surface Science and Engineering, 12(5), 348-364.
|
2018
|
https://doi.org/10.1504/IJSURFSE.2018.096742
|
- 51.
|
MJ Khan MJ, MF Wani, R Gupta.
|
Tribological properties of glass fiber filled polytetrafluoroethylene sliding against stainless steel under dry and aqueous environments: enhanced tribological performance in sea. International Journal of Materials Research Express, 5(5), 1-22.
|
2018
|
https://doi.org/10.1088/2053-1591/aac46c
|
- 52.
|
D Kumar, KB Deepak, SM Muzakkir, MF Wani, P K.
|
Enhancing tribological performance of Ti-6Al-4V by sliding process. J. of Tribology - Materials, Surfaces & Interfaces, 12(3), 137-143
|
2018
|
https://doi.org/10.1080/17515831.2018.1482676
|
- 53.
|
P Kumar, MF Wani.
|
Tribological characterization of hypereutectic Al-25Si alloy under dry and lubricated sliding conditions.
Trans. ASME, J. of Tribology, 140(1), 1-54.
|
2018
|
https://doi.org/10.1115/1.4036918
|
- 54.
|
P Kumar, MF Wani.
|
Tribological characterization of graphene oxide as lubricant additive on hypereutectic Al-25Si/Steel tribopair. Tribology Transaction 2018, 61(2), 335-346.
|
2018
|
http://dx.doi.org/10.1080/10402004.2017.1322735
|
- 55.
|
HK Pant, D Debnath, S Chakraborty, MF Wani, PK Das.
|
Mechanical and tribological properties of spark plasma sintered SiC/TiB2 and SiC/TiB2/TaC composites: effects of sintering temperatures (2000°C & 2100°C). Trans. Of ASME, J. of Tribology, 140(1), 1-10.
|
2018
|
http://dx.doi.org/10.1115/1.4037068
|
- 56.
|
MJ Mir MJ, MF Wani.
|
Modelling and analysis of tool wear and surface roughness in hard turning of AISI D2 steel using response surface methodology. International Journal of Industrial Engineering Computations, 9(1), 63-74.
|
2018
|
http://dx.doi.org/10.5267/j.ijiec.2017.4.004
|
- 57.
|
RA Khan, A Anand, MF Wani.
|
A holistic framework for environment conscious based product risk modeling and assessment using multi criteria decision making. Journal of cleaner production, 174, 954-965.
|
2018
|
https://doi.org/10.1016/j.jclepro.2017.11.005
|
- 58.
|
D Khabale, MF Wani.
|
Fretting wear characterization of AZ91 and AE42 magnesium alloys under dry sliding conditions.
Trans. of ASME, J. of Tribology, 140(1), 1-55.
|
2018
|
https://doi.org/10.1115/1.4036922
|
- 59.
|
Saleem S, Wani MF.
|
Effect of load on the retention of tribofilms at the contact interface under dry sliding conditions at 500ºC. Journal of Material Science and Engineering Technology, 49(2), 169-184.
|
2018
|
https://doi.org/10.1002/mawe.201700108
|
- 60.
|
Mir MJ, Wani MF.
|
Hard turning of high-carbon high chromium tool steel using CBN tools under different lubricating/cooling conditions. Journal of Science and Technology B- Theoretical Sciences, 6(2), 108 – 123.
|
2018
|
https://doi.org/10.20290/aubtdb.390999
|
- 61.
|
Mushtaq S, Wani MF, Saleem SS, Mir J.
|
Tribological and mechanical properties of PM Fe Cu Sn alloy containing graphite as solid lubricant. 201
World Review of Science, Technology and Sustainable Development, 119-134, 14(2)
|
2018
|
https://doi.org/10.1504/WRSTSD.2018.093216
|
- 62.
|
Khan RA, Anand A, Wani MF.
|
Risk mitigation in new product development – A concurrent engineering perspective.
International Journal of Scientific and Technical Advancements, 4(1), 1-4.
|
2018
|
|
|
Prof. G. A. Harmain
|
- 63.
|
Rishmaya, G. A. Harmain
|
Wear Performance of Ni-Cr-B-Si Hard-face Coatings Fabricated by Cold Metal Transfer Welding
Part C: Journal of Mechanical Engineering Science
|
|
|
- 64.
|
Showkat Ahmad Kanth, GA Harmain, Azher Jameel
|
Investigation of fatigue crack growth in engineering components containing different types of material irregularities by XFEM
Mechanics of Advanced Materials and Structures
|
2021
|
10.1080/15376494.2021.1907003
|
- 65.
|
Chandra Kant, G. A. Harmain
|
A Model Based Study of Fatigue Life Prediction for Multifarious Loadings
Key Engineering Materials, 882
|
2021
|
https://doi.org/10.4028/www.scientific.net/KEM.882.296
|
- 66.
|
Ishfaq Amin Maekai, G.A.Harmain
|
An assessment of erosive wear of hydro-turbine steel using statistical modeling and optimization
International Journal of Surface Science and Engineering, 15
|
2020
|
https://doi.org/10.1504/IJSURFSE.2021.114337
|
- 67.
|
Abhay Kumar, Ghulam Ashraf Ul Harmain
|
Assessment of Notch Effect Based on Finite Element Analysis and Digital Image Correlation Technique
Steel Research International, 92/2
|
2020
|
10.1002/srin.202000376
|
- 68.
|
Mohammad ZehabUd Din, G. A. Harmain
|
Assessment of erosive Wear of Pelton Turbine Injector: Nozzle and Spear Combination- A study of Chenani Hydro Power Plant). Engineering Failure Analysis, Elsevier
116
|
2020
|
10.1016/j.engfailanal.2020.104695
|
- 69.
|
Aritra Sarkar, Abhishek Kumar, Abhishek Kumar, NageshaAtikukke, Ghulam Ashraf Ul Harmain
|
Influence of creep damage on HCF behavior in alloy 617 M
International Journal of Pressure Vessels and Piping
188
|
2020
|
doi.org/10.1016/j.ijpvp.2020.104194
|
- 70.
|
Azher Jameel, Ghulam Ashraf Ul Harmain
|
Large deformation in bi-material components by XIGA and coupled FE-IGA techniques. Mechanics of Advanced Materials and Structures
|
2020
|
10.1080/15376494.2020.1799120
|
- 71.
|
Mohammad ZehabUd Din, G. A. Harmain
|
Assessment of erosive Wear of Pelton Turbine Injector: Nozzle and Spear Combination- A study of Chenani Hydro Power Plant). Engineering Failure Analysis, Elsevier
116
|
2020
|
10.1016/j.engfailanal.2020.104695
|
- 72.
|
Azher Jameel, G. A. Harmain
|
Effect of material Irregularities on fatigue crack growth by enriched Techniques. International Journal for Computational Methods in Engineering Science and mechanics
|
2020
|
doi.org/10.1080/15502287.2020.1772902
|
- 73.
|
Abhishek Kumar, Arira Sarkar, A nagesha, G. A. harmain
|
Generation of HCF creep interaction diagram in alloy 617M at 973 K. International Journal of Fatigue, 136
|
2020
|
doi.org/10.1016/j.ijfatigue.2020.105612
|
- 74.
|
Irshad Qadri Ghulam Ashraf Ul Harmain and M. F. Wani
|
Influence of Tool Tip Temperature on crater Wear of Ceramic Inserts during Turning Process of Inconel – 718 at varying hardness. Tribology in Industry, 42
|
2020
|
10.24874/ti.776.10.19.05
|
- 75.
|
Ishfaq Amin Maekai, G.A.Harmain
|
Influence of Operating Parameters on Slurry Erosion of Stainless Steel F6NM. Tribology in Industry, 42
|
2020
|
10.24874/ti.780.10.19.02
|
- 76.
|
Farooq Ahmad Najar, Ghulam Ashraf Ul Harmain
|
Influence on temperature profile in an oil film in thrust bearings using an embedded cooling circuitry beneath the pad surface: An experimental investigation. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 234/05
|
2020
|
doi.org/10.1177/1350650119886508
|
- 77.
|
Irshad Qadri Ghulam Ashraf Ul Harmain and M. F. Wani
|
The effect of cutting speed and work piece hardness on turning performance of nickel based super alloy – 718 using ceramic cutting insets. Journal of Engineering Research Express, 2
|
2020
|
10.1088/2631-8695/ab40f0
|
- 78.
|
Mohit Goswami, Sunil Goyal, Abhay Kumar, G.A. Harmain, and S.K. Albert
|
Effect of Triaxial State of Stress on Tensile Behavior of Modified 9Cr-1Mo Steel. Journal of Materials Engineering and Performance, 29, 1579 - 1588
|
2020
|
10.1007/s11665-020-04670-8
|
- 79.
|
AazimShafi Lone, Showkat Ahmad Kanth, G. A Harmain, Azher Jameel
|
XFEM modeling of frictional contact between elliptical inclusions and solid bodies. Materials Today Proceedings
26, 819 – 824
|
2020
|
doi.org/10.1016/j.matpr.2019.12.424
|
- 80.
|
Showkat Ahmad Kanth, AazimShafi Lone, , G. A Harmain, Azher Jameel
|
Modeling of embedded and edge cracks in steel alloys by XFEM. Materials Today Proceedings, 26, 814 - 818
|
2020
|
doi.org/10.1016/j.matpr.2019.12.423
|
- 81.
|
Ishfaq Amin Maekai, G.A.Harmain
|
Effect of sediment concentration and particle size on erosion behavior of forged stainless steel. Materials Today Proceedings, 26, 1412 - 1417
|
2020
|
10.1016/j.matpr.2020.02.293
|
- 82.
|
Ishfaq Amin Maekai, G.A.Harmain
|
Experimental and numerical investigation on the influence of rotational speed and particle size on wear of hydro turbine steel. Materials Today Proceedings, 26, 419 - 422
|
2020
|
doi.org/10.1016/j.matpr.2019.12.073
|
- 83.
|
G. A. Harmain, Anuranjan Kumar, Rajneesh Kumar Gupta, Kanwar Singh Arora
|
Investigation on interface morphology and joint configuration of dissimilar sheet thickness FSSW of marine grade Al alloy. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 41
|
2019
|
10.1007/s40430-019-1882-9
|
- 84.
|
Irshad Qadri Ghulam Ashraf Ul Harmain and M. F. Wani
|
Assessment of machinability of super alloy inconel 718 using Aluminum oxide and mixed oxide ceramic cutting tools
OP Conference Series Materials Science and Engineering
561
|
2019
|
10.1088/1757-899X/561/1/012057
|
- 85.
|
Irshad Qadri Ghulam Ashraf Ul Harmain and M. F. Wani
|
An Experimental Study on Investigation of Machining of nickel based Super Alloy 718. Materials Today Proceedings, 19, 541 - 545
|
2019
|
https://doi.org/10.1016/j.matpr.2019.07.730Get
|
- 86.
|
Irshad Qadri Ghulam Ashraf Ul Harmain and M. F. Wani
|
A Study on Effect of Tool Tip Temperature on Wear of Ceramic Cutting Tools, IOP, Journal of Physics: conference series, 1240
|
2019
|
https://doi.org/10.1088/1742-6596/1240/1/012119
|
- 87.
|
Showkat Ahmad Kanth, AazimShafi Lone, G. A. Harmain, Azher Jameel
|
Elasto Plastic Crack Growth by XFEM: A Review
Materials Today Proceedings, 18, 3472 - 3481
|
2019
|
10.1016/j.matpr.2019.07.275
|
- 88.
|
AazimShafi Lone, Showkat Ahmad Kanth, , G. A. Harmain, Azher Jameel
|
A state of art review on the modeling of Contact type Nonlinearities by Extended Finite Element method
Materials Today Proceedings, 18, 3462 - 3471
|
2019
|
10.1016/j.matpr.2019.07.274
|
- 89.
|
Malik Parveez, Ghulam Ashraf Ul Harmain, Amit Dhiman
|
Influence of height ratio on flow and heat transfer around trapezoidal geometry (a generic sharp-edged body) covering transition to periodic flow. International Journal of Heat and Mass Transfer, 124, 1285 - 1309
|
2018
|
https://doi.org/10.1016/j.ijheatmasstransfer.2018.03.105
|
- 90.
|
Saad Parvez, G.A. Harmain
|
Building Taxonomy for developing strategic partnerships with Original Equipment Manufacturers of a firm
Materials Today: Proceedings, 5, 25541-25552
|
2018
|
doi.org/10.1016/j.matpr.2018.10.361
|
- 91.
|
Malik Parveez, Amit Dhiman, GA Harmain
|
Aiding buoyancy driven flow and heat transfer features of converging and diverging trapezoidal cylinders
Sadhana, Springer India, 43
|
2018
|
doi.org/10.1007/S12046-018-0862-6
|
- 92.
|
Azher Jameel, G. A. Harmain
|
Extended Iso-Geometric Analysis for modeling Three Dimensional Cracks. Mechanics of Advanced Materials and Structures, 26, 915 - 923
|
2018
|
https://doi.org/10.1080/15376494.2018.1430275
|
- 93.
|
Aditya Kumar Singh, Azher Jameel, GA Harmain
|
Investigations on crack tip plastic zones by the extended iso-geometric analysis. Materials Today: Proceedings, 5, 19284-19293
|
2018
|
https://doi.org/10.1016/j.matpr.2018.06.287
|
- 94.
|
Showkat Ahmad Kanth, GA Harmain, Azher Jameel
|
Modeling of Nonlinear Crack Growth in Steel and Aluminum Alloys by the Element Free Galerkin Method
Materials Today: Proceedings, 5, 18805-18814
|
2018
|
https://doi.org/10.1016/j.matpr.2018.06.227
|
- 95.
|
Ghulam Harmain, Azher Jameel
|
A coupled FE-IGA technique for modeling fatigue crack growth in engineering materials. Mechanics of Advanced Materials and Structures, 26
|
2018
|
https://doi.org/10.1080/15376494.2018.1446571
|
- 96.
|
Azher Jameel, G. A. Harmain
|
Fatigue crack growth analysis of cracked specimens by the coupled finite element-element free Galerkin method
Mechanics of Advanced Materials and Structures, 26
|
2018
|
https://doi.org/10.1080/15376494.2018.1432800
|
- 97.
|
Irshad Qadri Ghulam Ashraf Ul Harmain and M. F. Wani
|
A study on wear analysis of mixed ceramic cutting tool
Journal of Materials Science and mechanical Engineering
5
|
2019
|
ISSN: 2393-9095
|
|
Prof. M. M. Wani
|
- 98. 1
|
M. Marouf Wani
|
Thermodynamic Investigations on the Design of
a Spark Ignition Hydrogen Operated Engine
Energy and Power, 11(1), 20-25
|
2021
|
10.5923/j.ep.20211101.02
|
- 99. 2
|
M. Marouf Wani
|
CFD Investigations of a Single Cylinder Spark Ignition
Engine Using Digital Valve Mechanism. Energy and Power, 11(1), 26-32
|
2021
|
10.5923/j.ep.20211101.03
|
- 100. 3
|
Siddavatam Naresh Kumar Reddy and Mohmad Marouf Wani1
|
An investigation on the performance and emission studies on diesel engine by addition of nanoparticles and antioxidants as additives in biodiesel blends
International Review of Applied Sciences and Engineering, Volume 12(2), 111-118
|
2021
|
10.1556/1848.2020.00157
|
- 101. 4
|
M. Marouf Wani
|
Research Investigations on the Conversion of a High Thermal Efficiency Engine into a Low Emissions engine by Changing, Energy and Power Its Bore to Stroke Ratio, 10(3), 49-56
|
2020
|
10.5923/j.ep.20201003.01
|
- 102. 5
|
Siddavatam Naresh Kumar Reddy, Mohmad Marouf Wani
|
Engine Performance and Emission Studies by Application of Nanoparticles and
Antioxidants as Additives in Biodiesel Blends
Journal of Composite and Advanced Materials
Volume 30, No. 3-4, 175-180
|
2020
|
10.18280/rcma.303-408
|
- 103. 6
|
S. Naresh Kumar Reddy and M. Marouf Wani
|
A comprehensive review on effects of nanoparticles-antioxidant additives - biodiesel blends on performance and emissions of diesel engine
Applied science and engineering progress
Volume 13, No. 4, 285-298
|
2020
|
10.14416/j.asep.2020.06.002
|
- 104. 7
|
R. Hussain Vali, M. Marouf Wani
|
Optimal utilization of ZnO nanoparticles blended diesel-water emulsion by varying compression ratio of a VCR diesel engine. Journal of Environmental Chemical Engineering, Volume 8, Issue 4, 103884
|
2020
|
10.1016/j.jece.2020.103884
|
|
105.
|
R. Hussain Vali, M. Marouf Wani
|
The effect of mixed nanoadditive-blended diesel–water emulsion on the performance, combustion, and emission characteristics of a DI diesel engine.
Heat Transfer, Volume 49, Issue 6, 3531–3548
|
2020
|
10.1002/htj.21786
|
|
106.
|
M. Marouf Wani
|
Digital Intake Valve Based CFD Investigations of a Single Cylinder Spark Ignition Engine to Improve Its Performance and Emissions Characteristics. Energy and Power, 10(2), 31-39
|
2020
|
10.5923/j.ep.20201002.02
|
|
107.
|
M. Marouf Wani
|
Octane Demand as a Criteria for Designing a Spark Ignition Engine Alternatively for Minimum CO Emissions and Maximum Power Generation
Energy and Power, 9(1), 27-37
|
2019
|
10.5923/j.ep.20190901.03
|
|
108.
|
M. Marouf Wani
|
Thermodynamic Evaluation of Methanol as an
Alternative Fuel to Gasoline in a Single Cylinder
Spark Ignition Engine. Energy and Power, 8(2), 35-45
|
2018
|
10.5923/j.ep.20180802.01
|
|
109.
|
M. Marouf Wani
|
Computational Investigations on the Performance and
Emissions Characteristics of a Single Cylinder Spark
Ignition Engine Using Petrol and Methanol as Its
Alternative Fuels, Energy and Power, 8(1), 44392
|
2018
|
10.5923/j.ep.20180801.02
|
|
Prof. Babar Ahmad
|
|
110.
|
Diyan Ul Imaan, Fasil Qayoom Mir, Babar Ahmad
|
Synthesis and characterization of a novel poly(vinyl alcohol)-based zinc oxide (PVA-ZnO) composite proton exchange membrane for DMFC, International Journal of Hydrogen Energy, Volume 46, Issue 22, 12230-12241
|
2021
|
https://doi.org/10.1016/j.ijhydene.2020.05.008
|
|
111.
|
Hussain O, Ahmad B, Saleem S.
|
Tribological performance of biomedical grade UHMWPE/nano-Al2O3/Vitamin-C hybrid composite for cartilage replacements. Materials Letters
291, 129515
|
2021
|
https://doi.org/10.1016/j.matlet.2021.129515.
|
|
112.
|
Hussain O, Ahmad B, Saleem S.
|
Analysis of tribological behavior of medical-grade UHMW polyethylene under dry and lubricated conditions with human body fluids using Taguchi and GRA techniques. Journal of Thermoplastic Composite Materials, 1 to 17
|
2020
|
https://doi.org/10.1177/0892705720941907
|
|
113.
|
Omar Hussain, S S Saleem*, B Ahmad
|
Friction and wear performance evaluation of UHMWPE using Taguchi based grey approach: A study on the influence of load and bio-serum lubrication
Materials Chemistry and Physics, 239, p 121918
|
2020
|
https://doi.org/10.1016/j.matchemphys.2019.121918
|
|
114.
|
Diyan Ul Imaan, Fasil Qayoom Mir, Babar Ahmad
|
Fabrication and characterization of poly (vinyl alcohol) – grapheme nanoplatelets (GNPs) proton exchange membrane for direct methanol fuel cells
Materials Today: Proceedings, Volume 26, Part 2
2901-2906
|
2020
|
https://doi.org/10.1016/j.matpr.2020.02.599
|
|
115.6
|
Umair Ashraf, S Shahid Saleem*, M F Wani, Jebran Khan
|
Effect of load on the tribo-performance of 23-8N valve steel against GGG-60 seat material. Materials Today: Proceedings, 19, 349-353
|
2019
|
doi.org/10.1016/j.matpr.2019.07.611
|
|
116.
|
Omar Hussain, Babar Ahmad, Shahid Saleem*, M Jebran Khan and M F Wani
|
Effect of counter-face material on the tribological characteristics of UHMW polyethylene under synovial fluid lubrication. Materials Today: Proceedings
19, 260-263
|
2019
|
doi.org/10.1016/j.matpr.2019.07.205
|
|
117.
|
Omar Hussain, Babar Ahmad, Shahid Saleem
|
Implant materials for knee and hip joint replacement: A review from the tribological perspective
IOP Conference Series, Materials Science and Engineering, 561 (1), P 12007
|
2019
|
doi:10.1088/1757-899X/561/1/012007
|
|
118.
|
Diyan ul Imaan, Fasil Qayoom Mir, and Babar Ahmad
|
Preparation and characterization of a novel nano-size titanium oxide-PVA (TiO2-PVA) composite ion exchange membrane. IOP Conf. Series: Journal of Physics: Conf. Series, 1240, 12130
|
2019
|
doi:10.1088/1742-6596/1240/1/012130
|
|
119.
|
Suhail Ganiny, Majid H Koul and Babar Ahmad
|
Stability Analysis of Dual-rate Haptics Controller Using Two Control Architectures, IOP Conf. Series: Journal of Physics: Conf. Series, 1240, 12145
|
2019
|
doi:10.1088/1742-6596/1240/1/012145
|
|
Dr. M. Hanief
|
|
120.
|
M.Hanief,M.S.Charoo
|
Archard’s Wear Law Revisited To Measure Accurate Wear Coefficient Considering Actual Sliding Velocity
Material today: proceedings
|
2021
|
doi.org/10.1016/j.matpr.2021.03.475
|
|
121.
|
Zahid Mushtaq M. Hanief
|
Enhancing The Tribological Characteristics Of Jatropha Oil Using
Jurnal Tribology, Page 129-143
|
2021
|
|
|
122.
|
Zahid Mushtaq M. Hanief
|
Prediction Of Friction And Wear During Ball-On-Flat Sliding Using Multiple Regression And Ann: Modeling And Experimental Validation, Jurnal tribology, 117-128
|
2021
|
|
|
123.
|
Zahid Mushtaq M Hanief
|
Evaluation Of Tribological Performance Of Jatropha Oil Modified With Molybdenum Disulphide Micro-Particles, ASME Journal of Tribology, Vol. 143 ,Pages / 021401-1 To 13
|
2021
|
Doi: 10.1115/1.4047752
|
|
124.
|
M.Hanief, M.S.Charoo
|
Modeling And Optimization Of Flank Wear And Surface Roughness Of Monel-400 During Hot Turning Usingartificial Intelligence
Journal Of Metallurgical And Materials Engineering, Vo 26 No1, 57-69
|
2020
|
Doi.Org/10.30544/473
|
|
125.
|
M.Hanief, M.S.Charoo
|
Modeling And Prediction Of Wear Rate Of Aluminum
Journal Of Metallurgical And Materials Engineering ,Vol 27 No 2
|
2020
|
//Doi.Org/10.30544/544
|
|
126.
|
M.S.Charoo, M.Hanief,
|
Improving The Tribological Characteristics Of A Lubricating Oil By Nano Sized Additives. Material today:proceedings
Volume 28, Part 2, 2020
|
2020
|
Doi.Org/10.1016/J.Matpr.2020.01.219
|
|
Dr. M. S. Charoo
|
|
127.
|
Wani Khalid Shafi, MS Charoo
|
Avocado oil mixed with an antiwear additive as a potential lubricant–Measurement of antiwear and extreme pressure properties. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 235 (11), 2087-2098
|
2020
|
https://doi.org/10.1177/0954406220951230
|
|
128.
|
Mehak Nisar, MS Charoo
|
Optimization of Fretting Wear Parameters and Effect of High Temperature on Fretting Wear Behavior of Al6061 Alloy and Al6061-SiC Composite, Silicon, 1-13
|
2021
|
https://doi.org/10.1007/s12633-021-01172-7
|
|
129.
|
Shariq Ahmad Bhat, MS Charoo
|
Formulation and rheology of bio-grease mixed with h-BN nanoparticles. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 1-13
|
2021
|
https://doi.org/10.1080/15567036.2021.1927250
|
|
130.
|
Pranav Dev Srivyas, MS Charoo
|
Tribological Characterization of Iron-Based Self-Lubricating Composite under Dry Sliding Conditions
Journal of The Institution of Engineers (India): Series D 1-8
|
2021
|
https://doi.org/10.1007/s40033-021-00265-2
|
|
131.
|
M Hanief, MS Charoo
|
Archard’s wear law revisited to measure accurate wear coefficient considering actual sliding velocity
Materials Today: Proceedings
|
|
https://doi.org/10.1016/j.matpr.2021.03.475
|
|
132.
|
Pranav Dev Srivyas, MS Charoo
|
Friction and wear reduction by graphene nano platelets for hybrid nano Aluminium matrix composite under dry sliding conditions
Metallurgical and Materials Engineering, 27 ,27-47
|
2020
|
https://doi.org/10.30544/536
|
|
133.
|
Pranav Dev Srivyas, MS Charoo
|
Nano lubrication behaviour of Graphite, h-BN and Graphene Nano Platelets for reducing friction and wear. Materials Today: Proceedings, 44, 7-11
|
2020
|
https://doi.org/10.1016/j.matpr.2020.04.785
|
|
134.
|
Pranav Dev Srivyas, MS Charoo
|
Tribological behaviour of nano additive based PAO lubricant for eutectic Al-Si alloy-chromium plated chrome steel tribopair. Materials Today: Proceedings
44, 1-6
|
2020
|
https://doi.org/10.1016/j.matpr.2020.04.784
|
|
135.
|
Omar Afzal, Wani Khalid Shafi, MS Charoo
|
Effect of h-BN nanoparticles on the tribological and rheological properties of API-Group I Oils
Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 1-17
|
2020
|
https://doi.org/10.1080/15567036.2020.1864516
|
|
136.
|
Wani Khalid Shafi, MS Charoo
|
Antiwear and extreme pressure properties of hazelnut oil blended with ZDDP. Industrial Lubrication and Tribology, 73 (2), 297-307
|
2020
|
https://doi.org/10.1108/ILT-06-2020-0217
|
|
137.
|
Pranav Dev Srivyas, MS Charoo
|
Tribological behavior of aluminum silicon eutectic alloy based composites under dry and wet sliding for variable load and sliding distance, SN Applied Sciences
2 (10), 1-21
|
2020
|
https://doi.org/10.1007/s42452-020-03433-3
|
|
138.
|
WK Shafi, M S Charoo
|
Effect of Temperature, Concentration and Aggregation on the Rheological Behavior of ZrO2 – Avocado Oil Nanolubricant. Tribology in Industry
42 (3), 407-418
|
2020
|
DOI: 10.24874/ti.864.03.20.06
|
|
139.
|
Pranav Dev Srivyas, M. S. Charoo
|
Friction and wear reduction properties of GNP nano-particles as nano-additive for Al-Si + Al2O3 composite/Chromium plated steel tribopair
Jurnal Tribologi, 25, 83-101
|
|
|
|
140.
|
WK Shafi, M S Charoo
|
An overall review on the tribological, thermal and rheological properties of nanolubricants
Tribology - Materials, Surfaces & Interfaces, 15, 1-35
|
2020
|
https://doi.org/10.1080/17515831.2020.1785233
|
|
141.
|
Pranav Dev Srivyas, M. S. Charoo
|
Friction and Wear Characterization of Spark Plasma Sintered Hybrid Aluminum Composite Under Different Sliding Conditions. Journal of Tribology (ASME)
142, 121701-121718
|
2020
|
DOI: 10.1115/1.4047456
|
|
142.
|
PD Srivyas, M S Charoo
|
Nano lubrication behaviour of Graphite, h-BN and Graphene Nano Platelets for reducing friction and wear. Materials Today: Proceedings, 44, 7-11
|
2020
|
https://doi.org/10.1016/j.matpr.2020.04.785
|
|
143.
|
PD Srivyas, M S Charoo
|
Tribological behaviour of nano additive based PAO lubricant for eutectic Al-Si alloy-chromium plated chrome steel tribopair. Materials Today: Proceedings
44, 1-6
|
2020
|
https://doi.org/10.1016/j.matpr.2020.04.784
|
|
144.
|
M Hanief, M S Charoo
|
Modeling and optimization of flank wear and surface roughness of Monel-400 during hot turning using artificial intelligence techniques. Metallurgical and Materials Engineering, 26 No 1, 57-69
|
2020
|
https://doi.org/10.30544/473
|
|
145.
|
Pranav Dev Srivyas, M. S. Charoo
|
Effect of Load on the Tribological Properties of Eutectic Al-Si Reinforced n-Al2O3 under Dry Sliding Conditions. Advances in Tribology, 2020, 1-18
|
2020
|
https://doi.org/10.1155/2020/3761745
|
|
146.
|
M. S. Charoo, M. Hanief
|
Improving the tribological characteristics of a lubricating oil by nano sized additives. Materials Today: Proceedings, 28, 1205-1209
|
2020
|
https://doi.org/10.1016/j.matpr.2020.01.219
|
|
147.
|
WK Shafi, M S Charoo
|
Rheological properties of hazelnut oil mixed with zirconium-dioxide nanoparticles. Materials Today: Proceedings, 26 Part 2, 745-749
|
2020
|
https://doi.org/10.1016/j.matpr.2020.01.019
|
|
148.
|
PD Srivyas, M S Charoo
|
Tribological characterization of hybrid aluminum composite under boundary lubricating sliding conditions. Materials Today: Proceedings
26, 492-500
|
2020
|
https://doi.org/10.1016/j.matpr.2019.12.114
|
|
149.
|
PD Srivyas, M S Charoo
|
Effect of load on the friction and wear properties of aluminum hybrid composite/chromium plated chrome steel tribopair under boundary lubrication conditions.
Materials Today: Proceedings, 26 Part 2, 287-295
|
|
https://doi.org/10.1016/j.matpr.2019.11.268
|
|
150.
|
PD Srivyas, M S Charoo
|
Effect of Load, Sintering Temperature and Reinforcement Concentration on Al-Si/γ-Al2O3/GNP Self-Lubricating Hybrid Composite. Tribology in Industry, 41 (4), 498-515
|
|
DOI: 10.24874/ti.2019.41.04.04
|
|
151.
|
PD Srivyas, M S Charoo
|
Effect of Sintering Temperature and Reinforcement Concentration on the Tribological Behaviors of Hybrid Aluminum Matrix Nano Composite. Tribology in Industry, 41 (4), 573-591
|
|
DOI: 10.24874/ti.2019.41.04.10
|
|
152.
|
PD Srivyas, M S Charoo
|
Effect of load on the tribological behavior of self-lubricating hybrid aluminum composite under dry sliding conditions. Materials Research Express
6 (12), 125702
|
2019
|
https://doi.org/10.1088/2053-1591/ab559c
|
|
153.
|
WK Shafi, M S Charoo
|
Experimental study on rheological properties of vegetable oils mixed with titanium dioxide nanoparticles. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 41, 431
|
2019
|
https://doi.org/10.1007/s40430-019-1905-6
|
|
154.
|
PD Srivyas, M S Charoo
|
Fabrication and micro-hardness properties of nano-Al2O3 reinforced aluminium metal matrix composite by field-assisted sintering technique/spark plasma sintering processing route. International Journal of Rapid Manufacturing, 8(3), 178-209
|
2019
|
DOI: 10.1504/IJRAPIDM.2019.100499
|
|
155.
|
PD Srivyas, M S Charoo
|
Effect of Lubricants Additive: Use and Benefit
Materials Today: Proceedings, 18, 4773-4781
|
2019
|
https://doi.org/10.1016/j.matpr.2019.07.465
|
|
156.
|
WK Shafi, M S Charoo
|
Rheological Properties Of Sesame Oil Mixed With H-Bn Nanoparticles As Industrial Lubricant
Materials Today: Proceedings, 18, 4963-4967
|
2019
|
https://doi.org/10.1016/j.matpr.2019.07.488
|
|
157.
|
Pranav Dev Srivyas, M S Charoo
|
Application of Hybrid Aluminum Matrix Composite in Automotive Industry. Materials Today: Proceedings
18, 3189-3200
|
|
https://doi.org/10.1016/j.matpr.2019.07.195
|
|
158.
|
SA Bhat, M S Charoo
|
Effect of Additives on the Tribological Properties of Various Greases-A Review. Materials Today: Proceedings ,18, 4416-4420
|
2019
|
https://doi.org/10.1016/j.matpr.2019.07.410
|
|
159.
|
M.S. Charoo, P.D. Srivyas
|
A Review on Tribological Characterization of Lubricants with Nano Additives for Automotive Applications. Tribology in Industry, 40(4), 594-623
|
|
DOI: 10.24874/ti.2018.40.04.08
|
|
160.
|
M.S. Charoo, P.D. Srivyas
|
Aluminum metal matrix composites a review of reinforcement; mechanical and tribological behavior.
International Journal of Engineering & Technology
7(2.4), 117-122
|
2018
|
DOI: 10.14419/ijet.v7i2.4.13020
|
|
161.
|
M.S. Charoo, P.D. Srivyas
|
Role of Fabrication Route on the Mechanical and Tribological Behavior of Aluminum Metal Matrix Composites – A Review. Materials Today: Proceedings
5(9), 20054-20069
|
2018
|
DOI: 10.1016/j.matpr.2018.06.372
|
|
162.
|
M.S. Charoo, P.D. Srivyas
|
Role Of Reinforcements On The Mechanical And Tribological Behavior Of Aluminum Metal Matrix Composites – A Review. Materials Today: Proceedings
5(9), 20041-20053
|
2018
|
DOI: 10.1016/j.matpr.2018.06.371
|
|
163.
|
M.S. Charoo, Wani Khalid Shafi
|
NanoLubrication Systems: An Overview
Materials Today: Proceedings, 5(9), 20621-20630
|
2018
|
DOI: 10.1016/j.matpr.2018.06.443
|
|
Dr. Saad Parvez
|
|
164.
|
SAAD PARVEZ
|
Application of Fuzzy VIKOR and cluster analysis for performance evaluation of OEMs. Materials Today, Elsevire, 27(2020) 1411-1416
|
2020
|
https://doi.org/10.1016/j.matpr.2020.02.785
|
|
165.
|
H Gada, D Mudgal, S Parvez, B Ahmad
|
Investigation of high temperature corrosion resistance of Ni25Cr coated and bare 347H SS in actual husk fired boiler atmosphere. Engineering Failure Analysis, 2020 - Elsevier
|
2018
|
https://doi.org/10.1016/j.engfailanal.2019.104256
|
|
Dr. Sheikh Shahid Saleem
|
|
166.
|
Masrat Bashir, Adnan Qayoum and Shahid Saleem
|
Experimental Investigation of Thermal and Tribological Characteristics of Brake Pad Developed from Eco-Friendly Materials
J Bio Tribo Corros 7, 66 (2021), 7(66)
|
2021
|
https://doi.org/10.1007/s40735-021-00502-x
|
|
167.
|
Hussain O, Ahmad B, Saleem S.
|
Tribological performance of biomedical grade UHMWPE/nano-Al2O3/Vitamin-C hybrid composite for cartilage replacements. Materials Letters
291,129515
|
2021
|
https://doi.org/10.1016/j.matlet.2021.129515.
|
|
168.
|
Sheikh Shahid Saleem, M F Wani,
|
Effect of load on the behaviour of tribofilms formed at the interface of austenitic steel and ductile iron - A Raman Spectroscopic study
Advances in Materials and Processing Technologies, 1 to 15
|
2020
|
https://doi.org/10.1080/2374068X.2020.1860591
|
|
169.
|
Sheikh Shahid Saleem, M F Wani, M Jebran Khan
|
Tribological investigations on tribofilm formation and retention under dry sliding conditions with increasing loads. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 235(1), 59-72
|
|
https://doi.org/10.1177/1464420720951835
|
|
170.
|
Hussain O, Ahmad B, Saleem S.
|
Analysis of tribological behavior of medical-grade UHMW polyethylene under dry and lubricated conditions with human body fluids using Taguchi and GRA techniques. Journal of Thermoplastic Composite Materials, 1 to 17
|
2020
|
https://doi.org/10.1177/0892705720941907
|
|
171.
|
K. R. Yellu Kumar, Adnan Qayoum, Shahid Saleem and Faisal Qayoum
|
Review of Effusion Cooling in Combustion Chambers of Gas Turbine Engines
IOP Conf. Series: Materials Science and Engineering, 804, p 012003
|
2020
|
doi:10.1088/1757-899X/804/1/012003
|
|
172.
|
Omar Hussain, S S Saleem*, B Ahmad
|
Friction and wear performance evaluation of UHMWPE using Taguchi based grey approach: A study on the influence of load and bio-serum lubrication. Materials Chemistry and Physics, 239, p 121918
|
2020
|
https://doi.org/10.1016/j.matchemphys.2019.121918
|
|
173.
|
Shahid Manzoor Wani, M F Wani, Shahid Saleem
|
Effect of load on the friction and wear behaviour of Silicon Nitride and Silicon Nitride titanium carbide ceramic composite. Materials Today: Proceedings, 19, 474 -477
|
2019
|
doi.org/10.1016/j.matpr.2019.07.611
|
|
174.
|
Umair Ashraf, S Shahid Saleem*, M F Wani, Jebran Khan
|
Effect of load on the tribo-performance of 23-8N valve steel against GGG-60 seat material, Materials Today: Proceedings
19, 349-353
|
2019
|
doi.org/10.1016/j.matpr.2019.07.611
|
|
175.
|
Omar Hussain, Babar Ahmad, Shahid Saleem*, M Jebran Khan and M F Wani
|
Effect of counter-face material on the tribological characteristics of UHMW polyethylene under synovial fluid lubrication. Materials Today: Proceedings, 19, 260-263
|
2019
|
doi.org/10.1016/j.matpr.2019.07.205
|
|
176.
|
Masrat Bashir, Adnan Qayoum and Shahid Saleem
|
Influence of lignocellulosic banana fiber on the thermal stability of brake pad material Mater. Res. Express, 6 (11), P 115551
|
2019
|
https://doi.org/10.1088/2053-1591/ab37bd
|
|
177.
|
Omar Hussain, Babar Ahmad, Shahid Saleem
|
Implant materials for knee and hip joint replacement: A review from the tribological perspective, IOP Conference Series, Materials Science and Engineering, 561 (1), P 12007
|
2019
|
doi:10.1088/1757-899X/561/1/012007
|
|
178.
|
Masrat Bashir, Adnan Qayoum and Shahid Saleem
|
Analysis of frictional heating and thermal expansion in a disc brake using COMSOL, Journal of Physics: Conference Series,
1240 (1), P 012094
|
2019
|
doi:10.1088/1742-6596/1240/1/012094
|
|
179.
|
Jebran Khan, Himanshu Gandotra, Shahid Saleem and M F Wani
|
Correlating the effect of material hardness, counterface hardness and load on the friction and wear of virgin and glass filled Polytetrafluoroethylene (PTFE) using Taguchi approach and statistical analysis, Journal of Physics: Conference Series, 1240 (1), P 012106
|
2019
|
doi:10.1088/1742-6596/1240/1/012106
|
|
180.
|
Saleem, S S, Wani, M F
|
Effect of load on tribofilms at the contact interface under dry sliding conditions at 500 C. Material wissenschaft und Werkstofftechnik (Materials Science and Engineering Te, 49 (2), chnology), 169-184
|
2018
|
doi:10.1002/mawe.201700108
|
|
181.
|
Shuhaib Mushtaq, M. F. Wani, Sheikh Shahid Saleem, Muhammad Junaid Mir
|
Tribological and mechanical properties of PM Fe-Cu-Sn alloy containing graphite as a solid lubricant. World Review of Science, Technology and Sustainable Development, 14 (2/3), 119-134
|
2018
|
doi:10.1504/wrstsd.2018.093216
|
|
Dr. Mohammad Mursaleen
|
|
182.
|
Mohammad Nishat Akhtar 1 , Muneer Khan 2 , Sher Afghan Khan 3 , Asif Afzal 4,* , Ram Subbiah 5 , Sheikh Nazir Ahmad 2 , Murtuja Husain 6 , Mohammad Mursaleen Butt 2 , Abdul Rahim Othman 7,* and Elmi Abu Bakar
|
Determination of Non-Recrystallization Temperature for Niobium Microalloyed Steel. Materials MDPI
14(10)
|
2021
|
https://doi.org/10.3390/ma14102639
|
|
183.
|
Rahul Kumar, Veera Sesha Kumar, M. Mursaleen Butt, Nazir Ahmed Seikh, Sher Afghan Khan, Asif Afzal
|
Thermo-mechanical Analysis and Estimation of Turbine Blade Tip Clearance of a Small Gas Turbine Engine under Transient Operating Condition
Applied Thermal Engineering, 179
|
2020
|
https://doi.org/10.1016/j.applthermaleng.2020.115700
|
|
184.
|
MM Butt, KA Najar, TH Dar
|
Experimental evaluation of multilayered CVD- and PVD-coated carbide turning inserts in severe machining of AISI-4340 steel alloy
Jurnal Tribologi, 29, 117-143
|
2021
|
|
|
185.
|
MMButt, Sheikh Nazir Ahmad
|
Modeling and analysis of debonding in a smart beam in sensing mode using variational formulation. Journal of King Saud University-Science, 32(1), 29-43
|
|
https://doi.org/10.1016/j.jksus.2017.09.013
|
|
186.
|
Kaleem Ahmad Najar, NA Sheikh, M Mursaleen Butt, Shuhaib Mushtaq, MA Shah
|
Engineered synthetic diamond film as a protective layer for tribological and machining applications: a review. Journal of Bio-and Tribo-Corrosion-Springer
5(3)
|
2019
|
https://doi.org/10.1007/s40735-019-0252-6
|
|
187.
|
S Mushtaq, MF Wani, M Nadeem, KA Najar, M Mursaleen
|
A study on friction and wear characteristics of Fe–Cu–Sn alloy with MoS2 as solid lubricant under dry conditions
:Sadhana, 44(12), 1-7
|
2019
|
https://doi.org/10.1007/s12046-019-1208-8
|
|
188.
|
Sajad Hussain Din, MA Shah, NA Sheikh, M Mursaleen Butt
|
Transactions of the Indian Institute of Metals volume
72(1), 1-9
|
2019
|
https://doi.org/10.1007/s12666-018-1454-1
|
|
189.
|
MA Reshi, M Mursaleen
|
Study of the failure of condenser tube in water cooled centrifugal chiller, journal of Physics, 1240(1), 121-152
|
2019
|
doi:10.1088/1742-6596/1240/1/012152
|
|
190.
|
Sajad Hussain Din, NA Sheikh, M Mursaleen Butt
|
Mechanical and Tribological Behavior of Microcrystalline CVD Diamond Coatings
journal of bio & tribo corrioson, 4(2), 1-10
|
2018
|
https://doi.org/10.1007/s40735-018-0144-1
|
|
191.
|
kaleem Ahmad Najar, N.A. Sheikh, Mohammad Mursaleen Butt, M.A. Shah
|
Enhancing the wear resistance of WC–Co cutting inserts using synthetic diamond coatings
Industrial Lubrication and Tribology Emerald Publishing Limited, 70(&) ,1224-1233
|
2018
|
https://doi.org/10.1108/ILT-04-2017-0089
|
|
Dr. Mukund Dutt Sharma
|
|
192.
|
Sanjay Kumar, Rakesh Sehgal, M.F.Wani, Mukund Dutt Sharma
|
Stabilization and Tribological Properties of Magnetorheological (MR) Fluids: A Review
Journal of Magnetism and Magnetic Materials, Elseiver, Available online 16 July 2021, 168295
|
2021
|
https://doi.org/10.1016/j.jmmm.2021.168295
|
|
193.
|
Yashpal, C.S. Jawalkar, Suman Kant, Narender Panwar, Mukund Dutt Sharma, Harveer Singh Pali
|
Effect of Particle Size Variation of Bagasse Ash on Mechanical Properties of Aluminium Hybrid Metal Matrix Composites, Materials Today: Proceedings, Elsevier
21, 4
|
2020
|
https://doi.org/10.1016/j.matpr.2020.01.319
|
|
194.
|
Narender Panwar, Amit Chauhan, Harveer Singh Pali, Mukund Dutt Sharma
|
Fabrication of aluminum 6061 red-mud composite using stir casting and Micro structure observation
Materials Today: Proceedings, Elsevier, 21, 4
|
2020
|
https://doi.org/10.1016/j.matpr.2020.01.318
|
|
Dr. Noor Zaman Khan
|
|
195.
|
Annayath Maqbool, Noor Zaman Khan, Arshad Noor Siddiquee
|
Towards Mg based light materials of future: Properties, applications, problems and their mitigation. Journal of Manufacturing Science and Engineering
|
2021
|
https://doi.org/10.1115/1.4051678
|
|
196.
|
Mohd Rafiq Parray, Noor Zaman Khan, Annayath Maqbool
|
Fabrication and characterization of magnesium based surface composites with hybrid reinforcements by friction stir processing: A review. Materials Today: Proceedings
|
2021
|
https://doi.org/10.1016/j.matpr.2021.03.694
|
|
197.
|
Noor Zaman Khan, Annayath Maqbool, Tariq Ahmad, Arshad Noor Siddiquee, Zahid A Khan
|
Fracture behaviour of friction stir welded dissimilar aluminium alloys. Materials Today: Proceedings
|
2021
|
https://doi.org/10.1016/j.matpr.2021.04.158
|
|
198.
|
Sheikh Shahid Ul Islam, Noor Zaman Khan, Mohammad Mohsin Khan
|
Effect of reinforcement on magnesium-based composites fabricated through stir casting: A review
Materials Today: Proceedings
|
2021
|
https://doi.org/10.1016/j.matpr.2021.03.710
|
|
199.
|
Fayaz Ahmad Mir, Noor Zaman Khan, Saad Parvez
|
Recent advances and development in joining ceramics to metals. Materials Today: Proceedings
|
2021
|
https://doi.org/10.1016/j.matpr.2021.04.047
|
|
200.
|
Sameera Mufazzal, Sarfaraz Masood, Noor Zaman Khan, SM Muzakkir, Zahid A Khan
|
Towards minimization of overall inconsistency involved in criteria weights for improved decision making. Applied Soft Computing
100
|
2021
|
https://doi.org/10.1016/j.asoc.2020.106936
|
|
201.
|
Dhruv Bajaj, Arshad Noor Siddiquee, Noor Zaman Khan, AK Mukhopadhyay, Sohail MA Khan Mohammed, Daolun Chen, Namrata Gangil
|
Flow, process forces and strains during Friction Stir Welding: A comprehensive First principle approach
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
235(5), 912-924
|
2021
|
https://doi.org/10.1177/0954405420970087
|
|
202.
|
Namrata Gangil, Sachin Maheshwari, Arshad Noor Siddiquee, Noor Zaman Khan, Xizhang Chen, Sergey Konovalov
|
Microstructural characterization and tribological behavior of surface composites fabricated on AA7050-T7451 alloy via friction stir processing
Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 235(2), 351-359
|
2021
|
https://doi.org/10.1177/1350650120950867
|
|
203.
|
Annayath Maqbool, Noor Zaman Khan
|
Analyzing barriers for implementation of public health and social measures to prevent the transmission of COVID-19 disease using DEMATEL method
Diabetes & Metabolic Syndrome: Clinical Research & Reviews, 14(5), 887-892
|
2020
|
https://doi.org/10.1016/j.dsx.2020.06.024
|
|
204.
|
Arshad Noor Siddiquee, Sunil Pandey, Mustufa Haider Abidi, Abdulrahman Al-Ahmari, Noor Zaman Khan, Namrata Gangil
|
Microstructural characterization and in-process traverse force during friction stir welding of austenitic stainless steel. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 234(5), 1031-1043
|
2020
|
https://doi.org/10.1177/0954406219888238
|
|
205.
|
Mohammad Owais Qidwai, Mohammad Muzaffarul Hasan, Noor Zaman Khan, Urfi Khan
|
Optimization of heat transfer effects in radial fin microchannel heat sink, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
|
|
https://doi.org/10.1080/15567036.2019.1704947
|
|
206.
|
Rajesh Attri, Ashishpal, Noor Zaman Khan, Arshad Noor Siddiquee, Zahid A Khan
|
ISM-MICMAC approach for evaluating the critical success factors of 5S implementation in manufacturing organisations. International Journal of Business Excellence, 20(4), 521-548
|
2020
|
https://doi.org/10.1504/IJBEX.2020.106437
|
|
207.
|
Mohammad Owais Qidwai, Mohammad Muzaffarul Hasan, Noor Zaman Khan, Mohd Ariz
|
Performance evaluation of simple radial fin design for single phase liquid flow in microchannel heat sink
Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 235(1), 80-92
|
2020
|
https://doi.org/10.1177/0954408920944269
|
|
208.
|
Noor Zaman Khan, Dhruv Bajaj, Arshad Noor Siddiquee, Zahid A Khan, Mustufa Haider Abidi, Usama Umer, Hisham Alkhalefah
|
Investigation on effect of strain rate and heat generation on traverse force in FSW of dissimilar aerospace grade aluminium alloys
Materials, 12(10), 1641
|
2019
|
https://doi.org/10.3390/ma12101641
|
|
209.
|
Pankul Goel, Noor Zaman Khan, Zahid A Khan, Abdulrahman Ahmari, Namrata Gangil, Mustufa Haider Abidi, Arshad Noor Siddiquee
|
Investigation on material mixing during FSW of AA7475 to AISI304. Materials and Manufacturing Processes, 34(2), 192-200
|
2019
|
https://doi.org/10.1080/10426914.2018.1544717
|
|
210.
|
Noor Zaman Khan, Talhah Shamshad Ali Ansari, Arshad Noor Siddiquee, Zahid A Khan
|
Selection of E-learning websites using a novel Proximity Indexed Value (PIV) MCDM method
Journal of Computers in Education, 6(2), 241-256
|
2019
|
https://doi.org/10.1007/s40692-019-00135-7
|
|
211.
|
Noor Zaman Khan, Suha K Shihab, Rajesh Attri, Arshad Noor Siddiquee, Zahid A Khan
|
Prioritization of lower back pain risk factors among industrial workers using the best–worst method
International Journal of Occupational Safety and Ergonomics, 27(2), 544-551
|
2019
|
https://doi.org/10.1080/10803548.2019.1600303
|
|
Dr. Mohammad Mohsin Khan
|
|
212.
|
Mohammad Mohsin Khan, Abhijit Dey
|
Selection of optimal processing condition during abrasive Wear of in-situ ZA-37/TiCp composites using MCDM technique, Ceramics International, 47(14) ,20090-20107
|
|
https://doi.org/10.1016/j.ceramint.2021.04.016
|
|
213.
|
Mohammad Mohsin Khan, Abhijit Dey & Mohammad Irfan Hajam
|
Experimental Investigation and Optimization of Dry Sliding Wear Test Parameters of Aluminum Based Composites, Silicon
|
|
https://doi.org/10.1007/s12633-021-01158-5
|
|
214.
|
Abhijit Dey, Mohammad Mohsin Khan
|
MCD Approach for Assessing the Optimal Operating Condition during Sliding Wear Characteristics of LM25/SiC AMCs Processed by an Improved Stir Casting Technique, Silicon
|
|
https://doi.org/10.1007/s12633-021-01123-2
|
|
215.
|
Mohammad Mohsin Khan, Mohammad Irfan Hajam, and Zahoor Ahmad Mir
|
Optimizing the effect of solid lubricants on the sliding Wear behavior of SiC p reinforced cast aluminum alloy
Journal of Bio-and Tribo-Corrosion, 7(1)
|
|
https://doi.org/10.1007/s40735-020-00460-w
|
|
216.
|
Ambreen Nisar, Shipra Bajpai, Mohammad Mohsin Khan, Kantesh Balani
|
Wear damage tolerance and high temperature oxidation behavior of HfB2:ZrB2–SiC composites
Ceramics International, 46(13), 21689-21698
|
2020
|
https://doi.org/10.1016/j.ceramint.2020.05.276
|
|
217.
|
Mohammad Mohsin Khan, Gajendra Dixit
|
Evaluation of Microstructure, Mechanical, Thermal and Erosive Wear Behavior of Aluminum-Based Composites, Silicon, 12(1), 59-70
|
2020
|
https://doi.org/10.1007/s12633-019-00099-4
|
|
218.
|
Ambreen Nisar, Mohammad Mohsin Khan, Shipra Bajpai, Kantesh Balani
|
Processing, microstructure and mechanical properties of HfB2-ZrB2-SiC composites: Effect of B4C and carbon nanotube reinforcements, International Journal of Refractory Metals and Hard Materials, 81, 111-118
|
|
https://doi.org/10.1016/j.ijrmhm.2019.02.014
|
|
219.
|
Ambreen Nisar, Mohammad Mohsin Khan, Kantesh Balani
|
Enhanced thermo-mechanical damage tolerance of functionally graded ZrB2-20SiC ceramic reinforced with carbon nanotubes. Ceramics International
45(5), 6198-6208
|
|
https://doi.org/10.1016/j.ceramint.2018.12.097
|
|
220.
|
Mohammad Mohsin Khan, Gajendra Dixit
|
Abrasive Wear Characteristics of Silicon Carbide Particle Reinforced Zinc Based Composite
Silicon, 10(4), 1315-1327
|
|
https://doi.org/10.1007/s12633-017-9607-0
|
|
Dr. Harveer Singh Pali
|
|
221.
|
Harveer Singh Pali*, A. Sharma, Y. Singh, N. Kumar
|
Biodiesel yield and properties optimization from Kusum oil by RSM, Fuel, 291
|
2021
|
https://doi.org/10.1016/j.fuel.2021.120218
|
|
222.
|
Harveer Singh Pali*, A. Sharma, Y. Singh, N. Kumar
|
Sal biodiesel production using Indian abundant forest feedstock, Fuel, 273
|
2020
|
https://doi.org/10.1016/j.fuel.2020.117781
|
|
223.
|
Harveer Singh Pali*, A. Sharma, Y. Singh, N. Kumar
|
Sustainable Route for S. Oleosa Biodiesel Production using Response Surface Methodology, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
|
|
https://doi.org/10.1080/15567036.2020.1837298
|
|
224.
|
H S Pali
|
Experimental Investigations of Storage Stability of Kusum Biodiesel, Journal of Biofuels, 10, 87-96
|
|
10.5958/0976-4763.2019.00012.6
|
|
225.
|
M. Raza, P. Kumar, Harveer Singh Pali
|
Production of Biodiesel using Waste Frying Oil for Diesel Engine, Journal of Biofuels, 9(2), 113-123
|
|
10.5958/0976-4763.2018.00013.2
|
|
Dr. Abhijit Dey
|
|
226.
|
Anshuman Das, Saroj Kumar Patel, Manoranjan Arakha, Abhijit Dey, Bibhuti Bhushan Biswal
|
Processing of hardened steel by MQL technique using nano cutting fluids. Materials and Manufacturing Processes, 36(3), 316-328
|
2021
|
|
|
227.
|
Abhijit Dey, Krishna Murari Pandey, Ram Naresh Rai, Akhtar Khan, Anshuman Das
|
Application Potential Of Response Surface Method On Electro Discharge Machining of AA6061–Cenosphere AMCS Prepared By Compocasting Method, Surface Review and Letters, 2150056
|
2021
|
|
|
228.
|
Mohammad Mohsin Khan, Abhijit Dey
|
Selection of optimal processing condition during abrasive Wear of in-situ ZA-37/TiCp composites using MCDM technique. Ceramics International, 47(14), 20090-20107
|
|
|
|
229.
|
Mohammad Mohsin Khan, Abhijit Dey, Mohammad Irfan Hajam
|
Experimental Investigation and Optimization of Dry Sliding Wear Test Parameters of Aluminum Based Composites. Silicon, 33
|
|
|
|
230.
|
Abhijit Dey, Mohammad Mohsin Khan
|
MCD Approach for Assessing the Optimal Operating Condition during Sliding Wear Characteristics of LM25/SiC AMCs Processed by an Improved Stir Casting Technique. Silicon, 28
|
2021
|
|
|
231.
|
Pawan Kumar, Manvendra Tiwari, Mamookho Elizabeth Makhatha, Abhijit Dey, Bipin Bihari Verma
|
Effect of Rate of Loading on Jute Fibre-Reinforced Polymer Composite. Transactions of the Indian Institute of Metals
|
2020
|
|
|
232.
|
Abhijit Dey Amit Kumar Dey
|
Selection of optimal processing condition during removal of Reactive Red 195 by NaOH treated jute fibre using adsorption. Groundwater for Sustainable Development, 12, 100522
|
2020
|
|
|
233.
|
AK Dey, U Kumar, A Dey
|
Use of response surface methodology for the optimization of process parameters for the removal of Congo Red by NaOH treated jute fibre. Desalination and Water Treatment, 115, 300-314
|
2018
|
|
|
234.
|
Abhijit Dey, Krishna Murari Pandey
|
Wire electrical discharge machining characteristics of AA6061/cenosphere as-cast aluminum matrix composites. Materials and Manufacturing Processes
33(12), 1346-1353
|
2018
|
|
|
235.
|
Abhijit Dey, Krishna Murari Pandey
|
Wear behaviour of Mg alloys and their composites–a review. International journal of materials research
109(11), 1050-1070
|
2018
|
|
|
236.
|
A Dey, KM Pandey
|
Selection of optimal processing condition during WEDM of compocasted AA6061/cenosphere AMCs based on grey-based hybrid approach, Materials and Manufacturing Processes, 33(14), 1549-1558
|
2018
|
|
|
237.
|
Mujibur Rahman, Abhijit Dey, Krishna Murari Pandey
|
Machinability of cenosphere particulate–reinforced AA6061 aluminium alloy prepared by compocasting
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 232(14), 2499-2509
|
2018
|
|
|
Dr. Manoj Kumar
|
|
238.
|
Neeraj Mehla, Manoj Kumar, Avadhseh Yadav
|
Annual performance evaluation of evacuated tube solar air collector with phase change material (PCM)
Journal of Solar Energy Engineering: Including Wind Energy and Building Energy Conservation (ASME), 142
31007, (1-10)
|
2020
|
https://doi.org/10.1115/1.4045823
|
|
239.
|
Neeraj Mehla, Krishan Kumar & Manoj Kumar
|
Thermal analysis of solar updraft tower by using different absorbers with convergent chimney. Environment, Development and Sustainability (Springer), 21, (1251-1269)
|
2019
|
DOI. Org/10.1007/s10668-018-0087-1
|